| Mechanical Properties |
| Ultimate tensile strength | 18.6 (green) or 31.8 (post-cured) MPa |
| Young’s modulus (modulus of elasticity) | 0.45 (green) or 1.26 (post-cured) GPa |
| Elongation at break | 67 (green) or 49 (post-cured) % |
| Physical Properties |
| UV resistance | No |
| Thermal Properties |
| Thermal expansion coefficient | 117 (green) or 145.1 (post-cured) × 10-6/ºC |
| Electrical Properties |
| ESD Safety | Yes |
| Post Treatments |
| Post-Processing | Post-curing |
| Common Applications |
| Parts requiring high impact strength | Prototyping HDPE parts that require a low-friction surface |
| Parts that are both rigid and flexible | Snap-fit parts and flexures |
Skip to content 
